Red Beam Laser Precision Level

Red Beam Laser Precision Level

Model: 40-6240

40-6240 Features:

  • Measures level or plumb using the precision level vial or two plumb vials that are built in and factory set
  • Bright red or green beam laser dots
  • Turn the laser on by turning the battery cap switch
  • Mark the center of the laser dot and subtract 1/2" to reference the bottom of the level
  • Working edge is machined flat to 0.005"
  • Solid aluminum frame - one piece case design won't bend or twist and it's weather protected
  • Recessed level vials are easy to read, but well protected
  • Features industrial grade optics that are fully coated for maximum performance
  • ¼" - 20 thread mounting hole can be mounted to standard camera tripods for stand alone operation
  • Battery operated with over 30 hours of continuous operation
  • Solid brass end caps provides for years of trouble free service
  • Optical calibration - no set screws
  • Wedge prisms factory calibrated - no field adjustments required
  • Ideal for site layouts, crosscut and break measurements, slope, conveyors, grade and transit work
Click for additional views:
  • 40-6240
Red Beam Industrial Magnetic Pulley (Sheave) Alignment Laser
Red Beam Industrial Magnetic Pulley (Sheave) Alignment Laser
Model: 40-6200
110V AC Machine Mountable Industrial Alignment Dot Lasers
110V AC Machine Mountable Industrial Alignment Dot Lasers
Model: 40-6220
Red Beam Industrial Cross-Line Laser
Red Beam Industrial Cross-Line Laser
Model: 40-6230
Red Beam Laser Precision Level
Red Beam Laser Precision Level
Model: 40-6240

40-6240 Includes:

  • Red or Green Laser Precision LevelTM
  • 2 AA "MN1500" Alkaline Batteries (Red), 2 "CR123A" Lithium Photo Batteries

Laser Wavelength

635nm (Red), 532nm (Green)

Laser Classification

Class IIIa (Red), Class II (Green)

Maximum Power Output

<5mW (Red), <1mW (Green)

Accuracy

+1/16"/100'

Level Vial

5 minute accurate to +1/8"/100'

Plumb Vials

30 minute accurate to +1/4"/20'

Power Supply

2AA "MN1500" alkaline batteries - over 4 hours continuous operation (Red).  2 "CR123A" lithium photo batteries - over 40 hours continuous operation (Green).  

Dimensions

1" x .125" x 13"

Weight

Less than 20 oz.

Centering parts on equipment - riveters, fluid and dry good fillers. Positioning parts on welders. Drill press alignments. Poining, positioning, aligning. Site layouts, crosscut and break meaurements, slope, conveyors, grade and transit  work.

Replacement Parts list not available at this time.